Table of Contents
Advertisement
4
Programming Instructions
Specific Command Summary
70
A list of these commands can be obtained from the instrument with the
:SYST:HELP:HEAD? SCPI query.
The commands are ordered in a command tree. Every command belongs
to a node in this tree.
The root nodes are also called the subsystems. A subsystem contains all
commands belonging to a specific topic. In a subsystem there may be
further subnodes.
All the nodes have to be given with a command. For example in the
command disp:brig
•
DISPlay is the subsystem containing all commands for controlling the
display,
•
BRIGhtness is the command selecting brightness.
Table 7
on page -70 gives an overview of the command tree. You see the
nodes, the subnodes, and the included commands.
Table 7
Specific Command Summary
Command
:SYSTem:COMMunicate:ETHer
net
:MACaddress?
:IPADdress:CURRent?
:SMASk:CURRent?
:HOSTname:CURRent?
:DOMainname:CURRent?
:DGATeway:CURRent?
:DHCP:ENABle
:DHCP:ENABle?
:HOSTname
Description
Get the MAC address of the network
adapter.
Get the current IP address of the instrument.
Get the currently used subnet mask.
Get the current host name.
Get the currently used domain name.
Get the currently used default gateway.
Enable or disable DHCP.
Check whether DHCP is enabled or
disabled.
Set the host name.
Keysight 81960A Compact TLS Module User's Guide
Page
Page 75
Page 76
Page 76
Page 76
Page 76
Page 77
Page 78
Page 78
Page 78
Advertisement
Table of Contents
