Making WLAN Measurements
Making Channel Power Measurements
Example of One-Button-Measurement - Channel Power
This example assumes the signal is correctly applied to the input.
Step 1. Press Mode Preset
Step 2. Press Meas, Channel Power
Step 3. View the measurement default view. (See
Figure 2-3
Channel Power (Default View)
If you have a problem, and get an error message, see Instrument Messages.
Example of Using SCPI Commands
Select WLAN mode
Select the Channel Power measurement
Get the measurement result Channel Power (dBm).
Keysight WLAN Measurement Guide
INST WLAN
CONF:CHP
READ:CHP:CHP?
Figure
2-3).
23