Lca Scpi Commands; Overview; Command Tree - Keysight N437 Series Programmer's Manual

1 Remote Operation

LCA SCPI Commands

Overview

Command Tree

42
The LCA SCPI commands do not fulfill the IEEE standard. They just offer a
simple way to control the LCA application on a LAN dependent socket port
or on a USB port.
Except for the *IDN? and :SYST:ERR? Commands, there is always a direct
relation between a SCPI command and a method or property of the
LCA.Net Remote Interface.
*CLS
[:LCA]:PNUMber? -> <string> [:LCA]:SNUMber? -> <string>
[:LCA]:SOFTware:VERSion? -> <string>
:LOAD:OO:CALibration:NAME noquery "<string>"
:LOAD:OE:CALibration:NAME noquery "<string>"
:MEASurement:ABORt
:MEASurement:CALData:SAVE noquery "<string>"
:MEASurement:CURRent:TYPE?
:MEASurement:INITialize:EE
:MEASurement:INITialize:EO
:MEASurement:INITialize:OE
:MEASurement:INITialize:OO
:MEASurement:STARt
:NWA:MODel? -> <string>
:NWA:PORT:NUMBer? -> <integer>
*OPC? -> <0|1> as string
:PARameter:ADVAnced:MODE /? -> <0|1> as string
:PARameter:ELECtrical:PATH:DEEMbedding /? -> <0|1> as string
:PARameter:ELECtrical:PATH:DEEMbedding:75Ohm /? ->
<0|1|ON|OFF> as string
:PARameter:ELECtrical:RECeiver:S2PFile[n] /? <string> (index
n = 1|2)
:PARameter:ELECtrical:SOURce:S2PFile[n] /? -> <string >
(index n = 1|2)
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
-> <string>
<SINGle|CONTinuous>