Remote Usb Commands - Keysight V3500A User Manual

Remote USB commands

You need to perform the following steps in order to perform remote USB
commands with the V3500A.
1 Set the serial number in the software. The numerical serial number of the
2 Initialize the V3500A.
Refer to
NOTE
Keysight V3500A User's Guide
V3500A will be used as the instrument unique address for communication and
can be found underneath the barcode on the back panel of the V3500A or
displayed using the menu button (see
page 13).
"Basic V3500A commands"
Driver Installation and Commands
"How to navigate the menu system"
on page 73 for more information.
3
on
65