Basic Switch Commands - D-Link DGS-1100-06/ME Cli Reference Manual

The Basic Switch commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
enable password
encryption
disable password
encryption
create account
config account
show account
delete account
save account
show session
show switch
enable web
disable web
enable autoconfig
disable autoconfig
show autoconfig
show config
enable auto learning
disable auto learning
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
save
reboot
reset
logout
ping
ping6
enable telnet
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[admin | operator | user] <username 15>
<username 15>
<username 15>
{<tcp_port_number 1-65535>}
[[config_in_nvram config_id <value 1-2>] | current_config] [begin | exclude]
<string 80>
{[config config_id <value 1-2> | log | account]}
{[config | system | account | password]} {force_agree}
<ipaddr> {times <value 1-255> | timeout <sec 1-99> | size <short 0-2080>}
<ipv6_addr> {frequency <sec 0-86400> | size <value 1-1522> | source_ip
<ipv6_addr> | timeout <sec 1-99> | times <value 1-255>}

BASIC SWITCH COMMANDS

7
4