Show Igmp_Snooping Multicast_Vlan_Group; Show Igmp_Snooping Statistic Counter - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28/ME:5# show igmp_snooping multicast_vlan default
Command: show igmp_snooping multicast_vlan default
Multicast VLAN Global State : Disabled
DES-1210-52/ME:5#

show igmp_snooping multicast_vlan_group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the IGMP snooping multicast vlan group information on the Switch:
DGS-1210-28/ME:5# show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VID Vlan Name
---- -------------------------------- -----------------------------------------
DES-1210-52/ME:5#

show igmp_snooping statistic counter

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the IGMP snooping statistics counter for VLAN ID 1:
DGS-1210-28MP/ME:5# show igmp_snooping statistic counter vlanid 1
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display the IGMP snooping multicast vlan group table entries on
the Switch.
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
The show igmp_snooping multicast_vlan_group command
displays the current IGMP snooping forwarding table entries
currently configured on the Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping
host table information is to be displayed. Up to 20 characters can be
used.
None.
IP Range
To display the statistics counter for IGMP protocol packets that are
received by the Switch since IGMP snooping was enabled.
show igmp_snooping statistic counter [vlan_name <string 32> |
vlanid <vidlist> | ports <portlist>]
The show igmp_snooping statistic counter command displays
the statistics counter for IGMP protocol packets that are received by
the Switch since IGMP snooping was enabled.
vlan_name <string 32> − Specify the VLAN name to be displayed.
vlanid <vidlist> − Specify the VLAN ID to be displayed.
ports <portlist> - Specify a list of ports to be displayed.
None.
333