Show Mpls Ldp Session - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to display LDP neighbors' password configurations.
Switch# show mpls ldp neighbor password
Neighbor
------------
202.11.1.1
192.1.1.1
Total Entries : 2
Switch#
67-38 show mpls ldp neighbor targeted
This command is used to display the LDP targeted peer configuration.
show mpls ldp neighbor targeted
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display all LDP targeted peer configurations.
Example
This example shows how to display all LDP targeted peer configurations.
Switch# show mpls ldp neighbor targeted
Targeted Peer
-------------
192.10.1.1
192.10.1.2
Total Entries : 2
Switch#
67-39

show mpls ldp session

This command is used to display LDP session information.
Password
----------
123456
abcd
Hello Interval Hold Time
-------------- -----------
15(Sec) 45(Sec)
15(Sec) 45(Sec)
775