Show Session; Show Switch - D-Link DGS-1210/ME series Reference Manual

Parameters
Restrictions
Example usage:
To deletes all the previously created accounts:

show session

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the way users logged in:
ID Live Time
--- --------------- --------------------------------------- ------
0 00:01:32
Total Entries: 1
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh

show switch

Purpose
Syntax
Description
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
accounts.
None.
Only Administrator-level users can issue this command.
DGS-1210-28P/ME:5# reset account
Command: reset account
Are you sure to proceed with clean account?(y/n)y
Success.
DGS-1210-28P/ME:5#
To display information about currently logged-in users.
show session
The show session command displays a list of all the users that are
logged-in at the time the command is issued. The information
incluDGS the session ID (0 for the first logged-in user, 1 for the next
logged-in user, etc.), the Protocol used to connect to the Switch, the
user's IP address, the user's access Level (1=user, 15=admin), and
the account name on the Switch.
None.
None.
From
Serial Port
To display information about the Switch.
show switch
The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System
Network configuration.
Level Name
---------------
5 anonymous
15
information, and Switch