xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
74-4
show utilization dram
Description
This command is used to display real-time DRAM utilization statistics.
Format
show utilization dram {unit <unit_id>}
Parameters
unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit.
<unit_id> - Enter the unit ID used here.
Restrictions
None.
Example
To display DRAM utilization:
DGS-3620-28PC:admin# show utilization dram
Command: show utilization dram
DRAM utilization :
Total DRAM
Used DRAM
Utilization
CTRL+C ESC q
Quit
74-5
show utilization flash
Description
This command is used to display real-time Flash utilization statistics.
Format
show utilization flash {unit <unit_id>}
Parameters
unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit.
<unit_id> - Enter the unit ID used here.
Restrictions
None.
: 262144
KB
:
119586
:
45%
SPACE n
Next Page
p
KB
Previous Page
r
Refresh
849