Show Utilization Dram; Show Utilization Flash - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
71-4

show utilization dram

Description
This command is used to display real-time DRAM utilization statistics.
Format
show utilization dram {unit <unit_id>}
Parameters
unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit.
<unit_id> - Enter the unit ID used here.
Restrictions
None.
Example
To display DRAM utilization:
DGS-3620-28SC:admin# show utilization dram
Command: show utilization dram
DRAM utilization :
Total DRAM
Used DRAM
Utilization
CTRL+C ESC q Quit
71-5

show utilization flash

Description
This command is used to display real-time Flash utilization statistics.
Format
show utilization flash {unit <unit_id>}
Parameters
unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit.
<unit_id> - Enter the unit ID used here.
Restrictions
None.
: 262144
: 119586
: 45%
SPACE n Next Page p
KB
KB
Previous Page r Refresh
812