Chapter 3 Connections and Wiring
3.4.5 Application: Using CN1 Convenient Connector for Wiring
The CN1 convenient connector (ASD-IF-SC5020) is designed for quick and easy wiring,
and especially suitable for the applications with limited DI/O requests. It's applicable to
ASDA-A2, ASDA-A2R and similar series AC servo drives. Its spring clamp terminals are
convenient for wiring because that users do not need to solder a wire to the connector
and the spring can hold a wire tightly even due to vibration. There are 5 digital inputs, 4
digital outputs, pulse command inputs, and an open collector type Z phase output on the
connector. Please refer to the following table for the pin definition of the connector.
3-56
A2
ASDA-
Revision September 2012