Delta ASDA-A2 Series User Manual page 685

A2
ASDA-
Dual Battery Box (Using Absolute Type Encoder Cables)
Servo Drive # 1
CN2 Connector
Absolute Type
Encoder Cable
Servo Motor # 1
This is the wiring diagram for connecting to a dual battery box. The scale of
NOTE
the objects does not match the dimensions as shown in the drawing above. For
different models of AC servo drives and motors, the connection cables may
differ.
1) Please refer to section 12.1.3 Connection Cables for Absolute Encoder to
2) For more information on the encoder connector specifications and the
12-8
There are two connection
ports on the front and rear
sides of the battery box
for connecting to two
servo drives.
*1
Battery
Box Cord
AW
*2
choose the encoder cables.
connection of servo drive and servo motor, please refer to section 3.1.5
Encoder Connector Specifications.
Battery
Box Cord
Dual Battery
AW
Box
Servo Motor # 2
Chapter 12 Absolute System
Servo Drive # 2
CN2 Connector
*1
Absolute Type
Encoder Cable
*2
Revision September 2012