Delta ASDA-A2 Series User Manual page 198

Analog Speed Command Low-pass Filter
Analog Speed Command Low-pass Filter is used to eliminate high frequency response and
electrical interference from an analog speed command and it is also with smoothing
function.
Relevant parameters:
P1-06 SFLT
Operation
Interface:
Default: 0
Control
Mode:
Range: 0 ~ 1000 (0: Disabled)
Data Size: 16-bit
Display
Format:
Settings: 0: Disabled
Revision September 2012
Accel / Decel Smooth Constant of Analog
Speed Command (Low-pass Filter)
Keypad/Software
S
Unit: ms
Decimal
Target Speed
Chapter 6 Control Modes of Operation
Communication
SFLT
Address: 010CH
010DH
Related Section:
Section 6.3.3
6-31