Chapter 10 Troubleshooting
Display
Revision September 2012
Fault Name
Error occurs when
reading CANopen PDO
object from EE-PROM.
Error occurs when writing
CANopen PDO object into
EE-PROM.
EE-PROM invalid address
range.
EE-PROM checksum error.
Password error
Clearing Method
NMT Maser send "Reset node" command to
its slave or reset the fault by sending the
control word (0x6040) through CAN
communication (the value of CANopen object
0x6040 should be reset).
NMT Maser send "Reset node" command to
its slave or reset the fault by sending the
control word (0x6040) through CAN
communication (the value of CANopen object
0x6040 should be reset).
NMT Maser send "Reset node" command to
its slave or reset the fault by sending the
control word (0x6040) through CAN
communication (the value of CANopen object
0x6040 should be reset).
NMT Maser send "Reset node" command to
its slave or reset the fault by sending the
control word (0x6040) through CAN
communication (the value of CANopen object
0x6040 should be reset).
NMT Maser send "Reset node" command to
its slave or reset the fault by sending the
control word (0x6040) through CAN
communication (the value of CANopen object
0x6040 should be reset).
A2
ASDA-
10-35