Delta ASDA-A2 Series User Manual page 61

Chapter 3 Connections and Wiring
If the users do not use the connector (without housing) and connect the cores from the
cable for wiring, please follow the terminal identification and core number of encoder
connector shown in the above table to complete the wiring. The users need to connect
core #1 to core #1, core #2 to core #2 and so on. To ease connection and to avoid wiring
error, it is recommended to number the cores first in accordance with the terminal
identification and then conducting the wiring.
Encoder Cable Connection (Diagram 2)
The scale of the objects does not match the dimensions as shown in the
NOTE
drawing above. For different models of AC servo drives and motors, the
connection cables may differ.
1) Please refer to section 3.4 for the descriptions of "Encoder Connector CN2".
3-10
A2
ASDA-
Revision September 2012