Delta ASDA-A2 Series User Manual page 706

Chapter 12 Absolute System
19: Mapping Parameter 1: Display the content of parameter P0-25 (mapping
target is specified by parameter P0-35)
20: Mapping Parameter 2: Display the content of parameter P0-26 (mapping
target is specified by parameter P0-36)
21: Mapping Parameter 3: Display the content of parameter P0-27 (mapping
target is specified by parameter P0-37)
22: Mapping Parameter 4: Display the content of parameter P0-28 (mapping
target is specified by parameter P0-38)
23: Status Monitor 1: Display the content of parameter P0-09 (the monitor status
is specified by parameter P0-17)
24: Status Monitor 2: Display the content of parameter P0-10 (the monitor status
is specified by parameter P0-18)
25: Status Monitor 3: Display the content of parameter P0-11 (the monitor status
is specified by parameter P0-19)
26: Status Monitor 4: Display the content of parameter P0-12 (the monitor status
is specified by parameter P0-20)
38: Voltage level of battery [0.1 Volt]. For example, when the display value is 36,
it indicates that the voltage level of the battery is 3.6V.
Revision September 2012
A2
ASDA-
12-29