Delta ASDA-A2 Series User Manual page 464

A2
ASDA-
P5-34 AC14
Operation
Interface:
Default: 50
Control
Mode:
Range: 1 ~ 65500
Data Size: 16-bit
Display
Format:
Settings: Refer to P5-20 for explanation.
The default setting value of this parameter is smaller and it is for the
deceleration setting when protection function is activated.
P5-35 AC15
Operation
Interface:
Default: 30
Control
Mode:
Range: 1 ~ 65500
Data Size: 16-bit
Display
Format:
Settings: Refer to P5-20 for explanation.
The default setting value of this parameter is smaller and it is for the
deceleration setting when the motor stops in high speed.
P5-36 CAST
Operation
Interface:
Default: 0
Control
Mode:
Range: 0 ~ (P5-10-1)
Data Size: 16-bit
Display
Format:
Revision September 2012
Accel / Decel Time 14
Keypad / Software
PR
Unit: ms
Decimal
Accel / Decel Time 15
Keypad / Software
PR
Unit: ms
Decimal
CAPTURE: Start Address of Data Array
Keypad / Software
ALL
Unit: N/A
Decimal
Chapter 8 Servo Parameters
Communication
Communication
Communication
Address: 0544H
0545H
Related Section:
Section 7.10
Address: 0546H
0547H
Related Section:
Section 7.10
Address: 0548H
0549H
Related Section:
Section 7.11.1
8-187