Delta ASDA-A2 Series User Manual page 334

A2
ASDA-
P0-53 ZDRT
Operation
Interface:
Default: 0x0000
Control
Mode:
Range: 0x0000 ~ 0x000F
Data Size: 16-bit
Display
Format:
Settings:
X: Filtering time for 1st monitoring variable
UYZ: Reserved
While the value of the monitoing variable is changed within the range between
the setting values of P0-54 and P0-55, this parameter is used to set the filter
timing for the monitoing variable. The value of monitoring variable will output
after the filtering time determined by parameter P0-53.
For example: when P0-09 is used
Revision September 2012
General Range Compare Digital Output –
Filtering Time
Keypad / Software
ALL
Unit: ms
Hexadecimal
Chapter 8 Servo Parameters
Communication
Address: 006AH
006BH
Related Section: N/A
8-57