Delta ASDA-A2 Series User Manual page 645

A2
ASDA-
ECMA Series
Brake pull-in time
[ms (Max)]
Vibration grade (μm)
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Vibration capacity
IP Rating
Approvals
Footnote:
*1 Rate torque values are continuous permissible values at 0~40
attaching with the sizes of heatsinks listed below:
ECMA-__04 / 06 / 08 : 250mm x 250mm x 6mm
ECMA-__10 : 300mm x 300mm x 12mm
ECMA-__13 : 400mm x 400mm x 20mm
ECMA-__18 : 550mm x 550mm x 30mm
Material type : Aluminum – F40, F60, F80, F100, F130, F180
*2 The holding brake is used to hold the motor shaft, not for braking the rotation. Never use it
decelerating or stopping the machine.
NOTE
1) Please refer to Section 1.2 for details about the model explanation.
11-10
E△13
05 10 15
70 70 70
IP65 (when waterproof connectors are used, or when an oil seal is used to be fitted to
the rotating shaft (an oil seal model is used))
E△18
20 20
70 70
15
o o o
0 C to 40 C (32 F to 104
o o o
-10 C to 80 C (-14 F to 176
20% to 90% RH (non-condensing)
20% to 90% RH (non-condensing)
2.5G
o
C ambient temperature when
Chapter 11 Specifications
G△13
30 03 06
70 70 70
o
F)
o
F)
Revision September 2012
09
70
for