Delta ASDA-A2 Series User Manual page 382

A2
ASDA-
Settings:
This parameter is used to optimize the encoder outputs (OA, OB). When the
users set the actual reached maximum motor speed, the servo drive will equalize
the encoder outputs automatically. When P1-76 is set to 0, it indicates that
equalizing function is not available.
P1-77 Reserved (Do Not Use)
P1-78 Reserved (Do Not Use)
P1-79 Reserved (Do Not Use)
P1-80 Reserved (Do Not Use)
P1-81 VCM2
Operation
Interface:
Default: rated speed
Control
Range: 0 ~ 10000
Data Size: 16-bit
Display
Format:
Settings:
Refer to P1-40 for explanation.
P1-82 VCMLPF
Operation
Interface:
Default: 0
Control
Range: 0 ~ 1000
Data Size: 16-bit
Display
Format:
Settings: (0: Disabled)
Revision September 2012
Max. Analog Speed Command or Limit 1
Keypad/Software
S, T
Mode:
Unit: r/min, 10V
Decimal
Switching Filter Time between P1-40 and
P1-81
Keypad/Software
S
Mode:
Unit: ms
Decimal
Chapter 8 Servo Parameters
Communication
Communication
Address: 019AH
019BH
Address: 019CH
019DH
Address: 019EH
019FH
Address: 01A0H
01A1H
Address: 01A2H
01A3H
Related Section: P1-40
Address: 01A4H
01A5H
Related Section:
P1-40, P1-81
8-105