Delta ASDA-A2 Series User Manual page 324

A2
ASDA-
P0-32 MAP8 Mapping Parameter 8
Operation
Interface:
Default: N/A, initialization is not required
Control
Range: determined by the parameter specified by
Data Size: 32-bit
Display
Format:
Settings:
Refer to P0-25 and P0-42 for explanation.
P0-33 Reserved (Do Not Use)
P0-34 Reserved (Do Not Use)
P0-35 MAP1A
Operation
Interface:
Default: 0x0
Control
Range: determined by the communication address
Data Size: 32-bit
Display
Format:
Settings:
The parameters from P0-35 to P0-42 are used to designate the desired read and
write parameter numbers for P0-25 to P0-32, and read and write the values of
the parameters those communication addresses are not consecutive through
communication setting or the keypad more efficiently.
The read / write parameter could be one 32-bit parameter or two 16-bit
parameters.
Revision September 2012
Keypad/Software
ALL
Mode:
Unit: -
P0-42
Hexadecimal
Block Data Read / Write Register 1
(for P0-25)
Keypad/Software
ALL
Mode:
Unit: -
of the designated parameter
Hexadecimal
Chapter 8 Servo Parameters
Communication
Communication
Address: 0040H
0041H
Related Section:
Section 4.3.5
Address: 0042H
0043H
Address: 0044H
0045H
Address: 0046H
0047H
Related Section:
Section 4.3.5
8-47