Show Run Vrf - Dell S4810 Reference Manual

default
Nu 0,
test1
test2
management
FTOS#show ip vrf test1
VRF-Name
test1

show run vrf

Displays configuration information corresponding to all the VRFs in the system.
S4810
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage Use this command to display information from the running-config corresponding
Information to either a specific VRF or all the VRFs in the system.
1706
Enter the keyword vrf and then the name of the VRF..
EXEC
EXEC Privilege
Introduced on the S-Series and Z9000.
0 Te 0/0-13,18-47,
Fo 0/48,52,56,60,
Ma 0/0,
Ma 1/0,
Ma 2/0,
Ma 3/0,
Ma 4/0,
Ma 5/0,
Ma 6/0,
Ma 7/0,
Ma 8/0,
Ma 9/0,
Ma 10/0,
Ma 11/0,
Vl 1
1 Te 0/14,16-17
2 Te 0/15
64
VRF-ID Interfaces
1 Te 0/14,16-17
Virtual Routing and Forwarding (VRF)