Show Vlt Backup-Link - Dell S4810 Reference Manual

Usage The version shown in the show vlt brief output command displays the VLT
Information
version number which is different from the Dell Networking OS version number.
VLT version numbers are begin with odd numbers such as 3 or 5.
Example (Brief)
Dell (conf) #show vlt brief
VLT Domain Brief
----------------------------
Domain ID:
Role:
Role Priority:
ICL Link Status:
Heart Beat Status:
VLT Peer Status:
Version:
Local System MAC address:
Remote System MAC address:
Remote Sytem Version:
Delay-Restore timer:

show vlt backup-link

Displays information on the backup link operation.
S4810
Syntax
show vlt backup-link
Default Not configured.
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version 8.3.8.0
Example
Dell_VLTpeer1# show vlt backup-link
VLT Backup Link
-----------------
Destination:
Peer HeartBeat status:
HeartBeat Timer Interval:
Virtual Link Trunking (VLT)
00:01:e8:8b:14:3c
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
10.11.200.18
Up
1
10
Primary
32768
Up
Not Established
Up
5 (1)
00:01:e8:8b:15:20
5 (1)
90 seconds
1723