Debug Vrrp - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

Version 7.5.1.0

Dell#clear counters vrrp vrf jay

Clear "show vrrp" counters of all vrrp groups on all

interfaces in VRF jay [confirm] yes

debug vrrp

Allows you to enable debugging of VRRP.

debug vrrp interface [vrrp-id] {all | bfd | database |

interface | ipv6 | packets | state | timer}

To disable debugging, use the no debug vrrp interface [vrrp-id] {all |

bfd | database | interface | ipv6 | packets | state | timer}

Virtual Router Redundancy Protocol (VRRP)

Introduced on the C-Series.

Introduced on the E-Series.

Enter the following keywords and slot/port or number

For Port Channel interface types, enter the keywords

port-channel then the number. The range is from 1 to

For a 1-Gigabit Ethernet interface, enter the keyword

gigabitethernet followed by the slot/port

information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

FortyGigabitEthernet then the slot/port information.

For a VLAN interface, enter the keyword vlan then the

VLAN ID. The VLAN ID range is from 1 to 4094.

(OPTIONAL) Enter a number from 1 to 255 as the VRRP

Enter the keyword all to enable debugging of all VRRP

Enter the keyword bfd to enable debugging of VRRP BFD

interactions.

Enter the keyword database to enable debugging of

configuration changes.

Enter the keyword interface to enable debugging of

interface state changes..