Show Vlt Statistics Igmp-Snoop - Dell S4810 Reference Manual

show vlt statistics igmp-snoop

Displays the informational packets and IGMP control PDUs that are exchanged between VLT peer nodes.
S4810
Syntax
show vlt statistics igmp-snoop
Default Not configured.
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Example
Dell_VLTpeer1#show vlt statistics igmp-snoop
VLT Igmp-Snooping Statistics
-------------------------------
IGMP Info Pkts sent:
IGMP Info Pkts Rcvd:
IGMP Reg Request sent:
IGMP Reg Request rcvd:
IGMP Reg Response sent:
IGMP Reg Response rcvd:
IGMP PDU Tunnel Pkt sent:5
IGMP PDU Tunnel Pkt rcvd:10
IGMP Tunnel PDUs sent:
IGMP Tunnel PDUs rcvd:
system-mac
Reconfigure the default MAC address for the domain.
S4810
Syntax
system-mac mac-address
Parameters
mac-address
Defaults Not configured.
Virtual Link Trunking (VLT)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
4
1
1
2
1
1
10
19
Enter the system MAC address for the VLT domain.
1731