Show Mac Accounting Access-List - Dell C9000 Series Reference Manual

packets)
Extended mac access list m3
seq 5 permit host
snap eq 600
Dell#
Dell#show mac access-lists out
Standard mac access list m1
seq 5 permit 11:22:33:44:55:66 count (0 packets)
Standard mac access list m2
seq 5 deny any order 2
seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0
packets)

show mac accounting access-list

This command displays ACL Mac accounting information.
C9000 Series
Syntax
show mac accounting access-list {acl_name} {interface | cam_count}
Parameters
access-list
acl_name
interface
cam_count
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.1.1.0
11:11:11:11:11:11 host
Display accounting information of all L2 access-lists configured.
Display accounting information for specified access-list.
Display accounting information for L2 access-list attached to a
particular interface.
Display accounting information of L2 access-lists with
cam_count.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
22:22:22:22:22:22
Access Control Lists (ACL) 333