Show Mac Accounting Destination - Dell Force10 S4810P Reference Manual

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 7.7.1.0
pre-Version
6.2.1.1
Example
FTOS#show mac-address-table aging-time
FTOS#
Related show mac-address-table
Commands

show mac accounting destination

Display destination counters for Layer 2 traffic (available on physical interfaces only).
E-Series, S4810
Syntax show mac accounting destination [mac-address vlan vlan-id]
[interface interface [mac-address vlan vlan-id] [vlan vlan-id]]
[vlan vlan-id]
Parameters
mac-address
interface
interface
vlan
Command Modes
Command History
Version 8.5.1.0
Introduced on the Z9000.
Introduced on the S4810.
Added the vlan option on the E-Series.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Mac-address-table aging time : 1800
– displays the current MAC address configuration.
(OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format
to display information on that MAC address.
(OPTIONAL) Enter the keyword interface followed by the
interface type, slot and port information:
•
•
•
vlan-id
(OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
• EXEC
• EXEC Privilege
Added support for 4-port 40G line cards on ExaScale.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
1045