Show Mac Accounting Access-List - Dell Z9500 Command Reference Manual

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.4.1.0

show mac accounting access-list

Display MAC access list configurations and counters (if configured).
Z9500
Syntax
show mac accounting access-list access-list-name interface
interface in | out
Parameters
access-list-
name
interface
interface
in | out
Command
•
Modes
•
Access Control Lists (ACL)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced.
Enter the name of a configured MAC ACL, up to 140
characters.
Enter the keyword interface then the one of the following
keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword port-
channel and then enter a number. The range is from 1
to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and then enter the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.
Identify whether ACL is applied on ingress or egress side.
EXEC
EXEC Privilege
277