Show Switch - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Accessing the Switch

show switch

show switch {detail}
Description
Displays the current switch information.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The command displays:
show switch
• sysName, sysLocation, sysContact
• MAC address
• System health check
• Recovery mode
• Watchdog state
• Current date, time, system boot time, and time zone configuration
• Any scheduled reboot information
• MSM information
• Software image information (primary/secondary image and version)
• Configuration information (primary/secondary configuration and version)
This information may be useful for your technical support representative if you have a problem.
Depending on the software version running on your switch, additional or different switch information
may be displayed.
Example
The following command displays current switch information:
show switch
Output from this command looks similar to the following:
SysName: BD-10808
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:30:48:41:ED:45
SysHealth check: Enabled
Recovery Mode: None
68 ExtremeWare XOS 11.0 Command Reference Guide