Show Switch - Extreme Networks ExtremeWare Command Reference Manual

Commands for Accessing the Switch

show switch

show switch
Description
Displays the current switch information.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
Viewing statistics on a regular basis allows you to see how well your network is performing. If you
keep simple daily records, you will see trends emerging and notice problems arising before they cause
major network faults. This way, statistics can help you get the best out of your network.
The command displays:
show switch
• sysName, sysLocation, sysContact
• MAC address
• License type
• System mode
• Recovery mode
• Transceiver diagnostics
• Watchdog state
• Reboot loop information
• Current date, time, system boot time, and time zone configuration
• Configuration modified information
• Any scheduled reboot information
• Scheduled upload/download information
• Operating environment (temperature, fans, and power supply status)
• Software image information (primary/secondary image, date/time, version)
• NVRAM configuration information (primary/secondary configuration, date/time, size, version)
• PACE configuration information
• Software licensing information
On the "i" series of switches, the command also displays:
• Diagnostics mode (BlackDiamond switch only)
• RED configuration
116 ExtremeWare 7.5 Command Reference Guide