Hp Procurve Switch - Extreme Networks Sentriant AG Software User's Manual

System Configuration
11 Re-enter the enable mode password.
12 Enter the Reconnect idle time. This is the amount of time in milliseconds that a telnet /SSH console
can remain idle or unused before it is reset.
13 Select the Show scripts plus symbol to show the following scripts:
Initialization script—The expect script used to log into the console and enter enable mode.
■
Re-authentication script—The expect script used to perform endpoint re-authentication.
■
Exit script—The expect script used to exit the console.
■
14 Click ok.
NOTE
Click revert to defaults to restore the default settings.

HP ProCurve Switch

To add an HP ProCurve switch:
Home window>>System configuration>>Quarantining>>802.1X Quarantine method radio button>>Add
an 802.1X device
104
Sentriant AG Software Users Guide, Version 5.2