Configure The Network License Server - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

NOTE If you already have a license server running for another Autodesk product, such as AutoCAD 2009 or
AutoCAD Architecture, you need to combine your Revit Architecture license file with the existing license file. Skip
this procedure and the procedure on Configuring the License Server, and go to
on page 9.
To set up the network license file
1 Copy the contents of the license file (supplied by Autodesk in an e-mail) to an ASCII text editor,
2 Save the file to the \Program Files\Autodesk Network License Manager\License folder.

Configure the Network License Server

Using the LMTOOLS utility, configure the license server so that you can manage the Revit Architecture
product license.
1 In Windows, click Start menu
2 Click the Service/License File tab.
3 Select Configuration using Services.
4 Click the Config Services tab.
5 For Service Name, do one of the following:
6 Enter the path to the Network License Manager daemon (lmgrd.exe), or click Browse to locate
7 Enter the path to the license file, or click Browse to locate the file.
8 Enter a path to the debug log, or click Browse to locate the file.
9 Select Use Services.
10 To automatically start lmgrd.exe when the system starts, select Start Server at Power Up.
11 To run lmgrd.exe as a Windows 2000 or Windows NT service, select Use Services.
12 Click Save Service to save the new configuration under the service name that you selected in
8 | Chapter 1 Welcome to Revit Architecture 2009
such as Notepad.
WARNING Do not copy the contents into a word processor. A word processor can add hidden
formatting that a text editor cannot read.
You can name the license file in any way, but you must save the file with an LIC extension.
NOTE If you use Notepad as your text editor, for Save As Type, select All Files so that a txt extension
is not added automatically.
LMTOOLS.
If a service name is selected, verify that it is the one you want to use to manage licenses.
If no service name exists, enter the service name to use to manage licenses. Revit Architecture
suggests that you enter Autodesk_nlm for the service name.
NOTE If you have more than one software vendor using FLEXlm for license management, the Service
Name list contains more than one option.
the file.
By default, this daemon is installed in the \Program Files\Autodesk Network License Manager folder.
For more information, see
Step 5.
Programs Autodesk
Set Up the Network License File
Combining Network License Files
Autodesk Network License Manager
on page 7.