Ntp Server Quick Steps - Alcatel-Lucent OmniSwitch AOS Release 6 Manual

NTP Server Quick Steps

5
You can check the client configuration using the
-> show ntp client
Current time:
Last NTP update:
Client mode:
Broadcast client mode:
Broadcast delay (microseconds):
NTP Server Quick Steps
By default the NTP Server functionality is enabled on the OmniSwitch and will respond to NTP client
requests. See the "Configuring the OmniSwitch as an NTP Server" on page 4-11
tion.
page 4-4
show ntp status
THU SEP 15 2005 17:44:54 (UTC)
THU SEP 15 2005 17:30:54
enabled
disabled
4000
OmniSwitch AOS Release 6 Switch Management Guide
Configuring Network Time Protocol (NTP)
command, as shown:
for additional informa-
July 2010