Motorola PowerQUICC II MPC8280 Series Reference Manual page 1243

Offset Name
0x19 LINK 10 INFO
0x1A LINK 9 INFO
0x1B LINK 8 INFO
0x1C LINK 15 INFO
0x1D LINK 14 INFO
0x1E LINK 13 INFO
0x1F LINK 12 INFO
0x20 LINK 19 INFO
0x21 LINK 18 INFO
0x22 LINK 17 INFO
0x23 LINK 16 INFO
0x24 LINK 23 INFO
0x25 LINK 22 INFO
0x26 LINK 21 INFO
0x27 LINK 20 INFO
0x28 LINK 27 INFO
0x29 LINK 26 INFO
0x2A LINK 25 INFO
0x2B LINK 24 INFO
0x2C LINK 31 INFO
0x2D LINK 30 INFO
0x2E LINK 29 INFO
0x2F LINK 28 INFO
0x30 CRC10
0x32 END-TO-END
CHANNEL
0x33 UNUSED
0x34 TAG
1
Boldfaced entries in the above table indicate parameters which must be initialized by the user. All other
parameters are managed by the microcode and should be initialized to zero unless otherwise stated.
MOTOROLA
Freescale Semiconductor, Inc.
Table 34-9. ICP Cell Template (continued)
Width
Byte Status and control of link with LID = 10
Byte Status and control of link with LID = 9
Byte Status and control of link with LID = 8
Byte Status and control of link with LID = 15
Byte Status and control of link with LID = 14
Byte Status and control of link with LID = 13
Byte Status and control of link with LID = 12
Byte Status and control of link with LID = 19
Byte Status and control of link with LID = 18
Byte Status and control of link with LID = 17
Byte Status and control of link with LID = 16
Byte Status and control of link with LID = 23
Byte Status and control of link with LID = 22
Byte Status and control of link with LID = 21
Byte Status and control of link with LID = 20
Byte Status and control of link with LID = 27
Byte Status and control of link with LID = 26
Byte Status and control of link with LID = 25
Byte Status and control of link with LID = 24
Byte Program to 0x00.
Byte Status and control of link with LID = 30
Byte Status and control of link with LID = 29
Byte Status and control of link with LID = 28
Hword Microcode-managed area. Microcode will program this field
dynamically.
Byte Program to any value desired for end-to-end
implementation-dependent signalling, or program to 0x00 if unused.
Byte Program to 0x6A.
Byte Internally-used tag value indicating that this is an ICP cell. Program to
0x80.
Chapter 34. Inverse Multiplexing for ATM (IMA)
For More Information On This Product,
Go to: www.freescale.com
IMA Programming Model
1
Description
34-33