Subaru IMPREZA GD 2007 Series Manual page 3848

asieps_tobira_IM_US.book 19 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Outer Mirror
GLASS/WINDOWS/MIRRORS
9. Outer Mirror
A: REPLACEMENT
1) Remove the outer mirror assembly. <Ref. to
GW-18, REMOVAL, Outer Mirror Assembly.>
2) Warm the area around the mirror holder (A) with
a hair drier until the edges of the mirror holder be-
come soft. (About 2 or 3 minutes with a 1,000 W dri-
er)
3) Use a flat tip screwdriver without sharp edges to
lift the mirror out of the mirror holder (A) to remove
the mirror.
(A)
GW-00011
4) Disconnect the mirror heater connector. (Model
with mirror heater)
5) Warm the area around the mirror holder with a
hair drier until the edges of the mirror holder be-
come soft. (About 2 or 3 minutes with a 1,000 W dri-
er)
6) Connect the mirror heater connector. (Model
with mirror heater)
7) Remove the backing of the new double-stick
tape, and push the mirror in to install it.
NOTE:
If the mirror holder is not warmed sufficiently, the
mirror holder edges may be damaged or the mirror
cracked.
GW-19