Subaru IMPREZA GD 2007 Series Manual page 3850

asieps_tobira_IM_US.book 21 ページ ２０１２年１月１７日 火曜日 午後３時４８分
11.Rear Door Glass
A: REMOVAL
1) Remove the rear door trim. <Ref. to EI-42, RE-
MOVAL, Rear Door Trim.>
2) Remove the sealing cover. <Ref. to EB-20, RE-
MOVAL, Rear Sealing Cover.>
3) Remove the stabilizers.
4) Remove the front end and rear end of the weath-
er strip.
Rear Door Glass
5) Remove the two screws to remove the weather
strip outer.
GW-00030
6) Operate the power window switch to move the
glass to the position shown in the figure, then re-
move the two nuts through the service holes.
7) Remove the two rear sash retaining nuts, and
move the rear sash rearward.
8) Remove the glass.
CAUTION:
GW-00229
Avoid impact and damage to the glass.
B: INSTALLATION
1) Install in the reverse order of removal.
NOTE:
Make sure the slider (front) and roller (rear) of glass
is placed securely in the front and rear sash.
2) Adjust the rear door glass. <Ref. to GW-22, AD-
JUSTMENT, Rear Door Glass.>
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to GW-5, REAR DOOR GLASS,
COMPONENT, General Description.>
GW-21
GLASS/WINDOWS/MIRRORS
GW-00230
GW-00231