Front Regulator And Motor Assembly - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 15 ページ ２０１２年１月１７日 火曜日 午後３時４８分
5. Front Regulator and Motor
Assembly
A: REMOVAL
1) Remove the door glass. <Ref. to GW-11, RE-
MOVAL, Front Door Glass.>
2) Loosen the nuts to remove the rear sash.
3) Disconnect the motor connector.
4) Loosen the four bolts and two nuts to remove
regulator assembly.
5) Loosen the screws to remove the motor assem-
bly.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the front door glass. <Ref. to GW-12, AD-
JUSTMENT, Front Door Glass.>
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to GW-4, FRONT DOOR GLASS,
COMPONENT, General Description.>

Front Regulator and Motor Assembly

GW-00221
GW-00222
GW-00223
GW-15
GLASS/WINDOWS/MIRRORS
C: INSPECTION
1) Make sure that the power window motor rotates
properly when the battery voltage is applied to the
terminals of motor connector.
2) Change polarity of battery connection to termi-
nals to ensure that the motor rotates in reverse di-
rection.