Rear Regulator And Motor Assembly - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 23 ページ ２０１２年１月１７日 火曜日 午後３時４８分
12.Rear Regulator and Motor
Assembly
A: REMOVAL
1) Remove the rear door glass. <Ref. to GW-21,
REMOVAL, Rear Door Glass.>
2) Remove the front sash.
3) Disconnect the motor connector.
4) Remove the four bolts and two nuts to remove
regulator assembly.
5) Remove the screws to remove motor assembly.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the rear door glass. <Ref. to GW-22, AD-
JUSTMENT, Rear Door Glass.>
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to GW-5, REAR DOOR GLASS,
COMPONENT, General Description.>
C: INSPECTION
1) Make sure that the power window motor rotates
properly when the battery voltage is applied to the
terminals of motor connector.
2) Change polarity of battery connection to termi-
nals to ensure that the motor rotates in reverse di-
rection.

Rear Regulator and Motor Assembly

GW-00234
GW-00235
GW-23
GLASS/WINDOWS/MIRRORS