Subaru IMPREZA GD 2007 Series Manual page 3851

asieps_tobira_IM_US.book 22 ページ ２０１２年１月１７日 火曜日 午後３時４８分
GLASS/WINDOWS/MIRRORS
C: ADJUSTMENT
NOTE:
The rear door glass, as a rule, is adjusted in the
same manner as front door glass, although they
are different in dimension.
1) Adjust the glass position using the following di-
mensions as a guide line.
A A
(1) 12 mm (0.472 in)
NOTE:
• If dimensions are smaller than the given dimen-
sions, glass may get caught in weather strip during
lifting/lowering operation and may not be fully open.
• After adjustment, move the glass up and down to
check whether it is caught.
2) Attach the special tool to the glass, and adjust
the glass adhesion until the dimensional value be-
comes as shown below.
ST 61299AE010 SPACER (Glass thickness: 4
mm (0.157 in) for rear door
glass)
A
A
(1) 3.7 — 5.3 mm (0.146 — 0.209 in)
(2) 6 mm (0.236 in)
(3) ST
NOTE:
• If rear glass adhesion is higher than necessary,
glass may get caught in weather strip of center pil-
lar corner, resulting in early wear of weather strip.
Be careful when adjusting.
• After adjustment, move the glass up and down to
check whether it is caught.
Rear Door Glass
(1) (1)
A-A
GW-00067
(1)
(3)
(2)
A-A
GW-00337
GW-22