Toyota Tundra 2005 Service - Repair - Maintenance page 3466

7 Clips
Mode Control Cable
AIR CONDITIONING -
REMOVAL
1. REMOVE CENTER CLUSTER INTEGRATION PANEL
(a) Remove the 3 heater control knobs.
(b) Remove the 5 screws.
(c) Remove the integration control panel by pulling the por-
tions indicated by arrows in the illustration.
(d) Disconnect the connector.
H11175
2. REMOVE LOWER LH FINISH PANEL
3. REMOVE HEATER TO REGISTER DUCT NO. 2
4. REMOVE GLOVE COMPARTMENT DOOR
5. REMOVE LOWER NO. 2 FINISH PANEL
6. REMOVE HEATER TO REGISTER DUCT NO. 4
(See page
7. DISCONNECT HEATER CONTROL CABLES
Water Valve Control
Cable
8. REMOVE HEATER CONTROL ASSEMBLY
Remove the heater control assembly, then disconnect the con-
nectors.
I11160
HEATER CONTROL ASSEMBLY
BO-1 11)
Author :
AC-101
AC27O-03
Air Mix Control Cable
I28080
Date :
5128