Toyota Tundra 2005 Service - Repair - Maintenance page 3499

Hide thumbs Also See for Tundra 2005:

Table of Contents

ANTI-RUST TREATMENT

When replacing body panels, always apply body sealer, anti-rust agent or undercoat according to the requirements of your

HINT: For further details, see the description given in Section AR of this manual.

Apply body sealer to the

required areas.

Cartridge Type

Undercoating

(Water base)

INTRODUCTION - General Repair Instructions

ANTI-RUST AGENT (WAX)

Apply anti-rust agent to

following sections.

_ Inside of the hems of the

doors and hood.

_ Around the hinges of the

doors and hood.

_ Inside of the welded parts

with boxed cross-section.

Rustop W (Aerosol)

Rustop W (1 Milky White)

Rustop W (18 Milky White)

Rustop B (1 Black)

Rustop B (18 Black)

The above SSM or equivalent

Apply undercoat to the underbody and

wheel housings.

Paster UC (Oil Base)

Paster UW (Water Base)

Paster Gun (For thick application)

The above SSM or equivalent

Parts Number

Parts Number