Toyota Tundra 2005 Service - Repair - Maintenance page 3473

FOREWORD
This repair manual has been prepared to provide essential
information on body panel repair methods (including cutting and welding
operations, but
TOYOTA TUNDRA.
Applicable models: VCK30, 40 series
Applicable models:
This manual consists of body repair methods, exploded diagrams and il-
lustrations of the body components and other information relating to body
panel replacement such as handling precautions, etc. However, it should
be noted that the front fenders of the TOYOTA model is bolted on and
require no welding.
When repairing, don't cut and join areas that are not shown in this manual.
Only work on the specified contents to maintain body strength.
Body construction will sometimes differ depending on specifications and
country of destination. Therefore, please keep in mind that the information
contained herein is based on vehicles for general destinations.
For the repair procedures and specifications other than collision-damaged
body components of the TOYOTA TUNDRA, refer to the repair manuals.
If you require the above manuals, please contact your TOYOTA Dealer.
All information contained in this manual is the most up-to-date at the time
of publication. However, specifications and procedures are subject to
change without prior notice.
excluding painting)
UCK30, 40 series
for the