Chapter 10 Layer 2 Acl Commands; Clear Counters Access-List Mac - Dell 8 Command Reference Manual

Layer 2 ACL commands

clear counters access-list mac

Clears all the Media Access Control (MAC) ACL counters for all interfaces which have ACL applied
on them or for a specific interface.
Synopsis clear counters access-list mac name [interface |port-channel number | {in | ex}tengigabitethernet
slot/port| vlan vlan_id]
Operands. name
interface
Defaults There are no default configurations for this command.
Command Privileged EXEC mode
Modes
Description Use this command to clear counters for all or for a specific interface for MAC access list counters.
Usage If the interface keyword is not specified, then ACL counters on all interfaces which have this ACL
Guidelines applied are cleared. There are 255 ACL counters supported per port group.
Example To clear counters for the configured MAC access list named test on an interface:
To clear counters for the configured MAC access list named test on all interfaces on which this ACL
is applied:
See Also show mac access-list, show statistics access-list
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the name of the MAC ACL.
Use this keyword to specify any of the following interfaces:
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the port-channel number. The range of valid values is 1-63.
vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583.
switch#clear counters access-list mac test interface intengigabitethernet 0/1
switch#clear counters access-list mac test
Chapter
10
141