Introduction To Programming; Introduction To The Scpi Language - Keysight U2722A Programmer's Reference Manual

1

Introduction to Programming

Introduction to the SCPI Language

SCPI, also known as the Standard Commands for Programmable Instruments, is
an ASCII-based instrument command language designed for test and
measurement instruments. SCPI commands are based on a hierarchical structure,
also known as a tree system. In this system, associated commands are grouped
together under a common node or root, thus forming subsystems. A portion of the
SOURce subsystem is shown below to illustrate the tree system.
SOURce:
CURRent:
SOURce is the root keyword of the command, VOLTage and CURRent are
second-level keywords, and RANGe and LIMit are third-level keywords.
A colon ( : ) separates a command keyword from a lower-level keyword.
For example, in the above syntax statement, VOLT and VOLTAGE are both
acceptable forms. You can use upper- or lower-case letters. Therefore, VOLTAGE,
volt, and Volt are all acceptable. Other forms, such as VOL and VOLTAG, are not
valid and will generate an error.
12
VOLTage:
RANGe <CPD>, (<(@1)|(@2)|(@3)>)
RANGe? (<(@1)|(@2)|(@3)>)
LIMit <CPD>, (<(@1)|(@2)|(@3)>)
LIMit? (<(@1)|(@2)|(@3)>)
Keysight U2722A/U2723A Programmer's Reference