Route Map Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Figure 6-187 IP Standard Access List Settings - View Detail (IPv6) window
The fields that can be configured are described below:
Parameter
Direction
IPv6 Access
Address
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Delete button to remove the specific entry.

Route Map Settings

This window is used to create a route map or add/delete sequences to a route map.
To view the following window, click L3 Features > IP Route Filter > Route Map Settings, as shown below:
The fields that can be configured are described below:
Parameter
Route Map Name
Click the Find button to locate a specific entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
Description
Use the drop-down menu to Permit or Deny the specified network.
Enter the IPv6 network address followed by the prefix.
Figure 6-188 Route Map Settings window
Description
Enter the route map name.
333