Show Vrrp - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
characters long.
If no parameter is specified, all the VRRP entries will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete VRRP:
DGS-3120-24TC:admin#delete vrrp vrid 1 ipif System
Command: delete vrrp vrid 1 ipif System
Success.
DGS-3120-24TC:admin#

113-7 show vrrp

Description
This command is used to display the VRRP settings.
Format
show vrrp {ipif <ipif_name 12> {vrid <vrid 1-255>}}
Parameters
ipif - (Optional) Specify the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name to be displayed here. This name can be up to
12 characters long.
vrid - (Optional) Specify the Virtual Router ID to be displayed.
<vrid 1-255> - Enter the Virtual Router ID to be displayed here. This value must be between 1
and 255.
If no parameter is specified, then all the VRRP entries will be displayed.
Restrictions
None.
Example
To display the VRRP configuration:
1027