Aaa Commands - D-Link 5000 Series Cli Reference Manual

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
Display Parameters
ID
User Name
Connection From
Idle Time
Session Time
Session Type
4-52 show loginsession long
This command is used to display the full user names of those users currently logged in to the switch.
show loginsession long
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following provides an example of the command.
(Routing)#show login session long
User Name
-------------
Admin
test1111test1111test1111test1111test1111test1111test1111test1111

AAA Commands

In this section, the commands used to add, manage, and delete system users are described. There are
two default users set for the D-LINK OS software: admin and guest. System settings can be viewed and
configured by the admin user, while they can only be viewed by the guest user.
Indicates the login session ID.
Indicates the name of the user logged on to the system.
Indicates the IP address of the remote client machine or EIA 232 for the
serial port connection.
Indicates the amount of time the current session has been idle.c
Indicates the total amount of time the current session has been
connected.
Indicates the type of session, i.e., telnet serial or SSH session.
54