Rmon Alarm Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following window will appear.
Click the Back button to return to the previous window.

RMON Alarm Settings

This window is used to view and configure alarm entries to monitor an interface.
To view the following window, click Management > RMON > RMON Alarm Settings, as shown below:
The fields that can be configured in RMON Alarm Settings are described below:
Parameter
Index
Interval
Variable
Type
Rising Threshold
Falling Threshold
Rising Event Number
Falling Event Number
Owner
Figure 4-17 RMON History Settings (Show Detail) Window
Figure 4-18 RMON Alarm Settings Window
Description
Enter the alarm index. The range is from 1 to 65535.
Enter the interval in seconds for the sampling of the variable and
checking against the threshold. The valid range is from 1 to
2147483648 seconds.
Enter the object identifier of the variable to be sampled.
Select the monitoring type. Options to choose from are Absolute and
Delta.
Enter the rising threshold value between 0 and 2147483647.
Enter the falling threshold value between 0 and 2147483647.
Enter the index of the event entry that is used to notify the rising
threshold crossing event. The valid range is from 1 to 65535. If not
specified, no action is taken while crossing the ringing threshold.
Enter the index of the event entry that is used to notify the falling
threshold crossing event. The valid range is from 1 to 65535. If not
specified, no action is taken while crossing the falling threshold.
Enter the owner string up to 127 characters.
45