Show Radius; Config 802.1X Auth_Mode - D-Link DGS-3100 SERIES Cli Manual

Restrictions
Example usage:
To configure the RADIUS settings:
DGS3100# config radius 10.48.74.121 key dlink default
Success.
DGS3100#

show radius

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display RADIUS settings on the Switch:
DGS3100# show radius
Index
--------
1
DGS3100#

config 802.1x auth_mode

Purpose
Syntax
Description
Parameters
Restrictions
auth_port <udp_port_number 1-65535> – The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535> – The UDP port number for
accounting requests. The default is 1813.
Only Administrator or operator-level users can issue this command.
To display the current RADIUS configurations on the Switch.
show radius
The show radius command displays the current RADIUS
configurations on the Switch.
None.
None.
IP Address Auth-Port
Number
---------------- --------------
10.1.1.1 1812
To configure the 802.1x authentication mode on the Switch.
config 802.1x auth_mode ports <portlist> [port_based |
mac_based]
The config 802.1x auth_mode command enables either the port-
based or MAC-based 802.1x authentication feature on the Switch.
portlist – A port or a range of ports to be configured.
[port_based | mac_based] – Specifies whether 802.1x authentication
is by port or MAC address.
Only Administrator or operator-level users can issue this command.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Acct-Port Status
Number
-------------- ------------ ---------------------
1813 Active
Key
switch
134