DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Match IP Access-List
Match IPv6 Access-List
Match MAC Access-List
Click the Please Select button navigate to a list of access lists that can be selected to be used in this
configuration.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
After clicking the Please Select button, the following window will appear:
Select the radio button next to the entry to use that access list in the configuration.
Click the OK button to accept the selection made.
ACL VLAN Filter
This window is used to view and configure the ACL VLAN filter settings.
To view the following window, click ACL > ACL VLAN Filter, as shown below:
Figure 8-105 ACL VLAN Access Map (Binding) Window
Description
Here the IP access list that will be matched will be displayed.
Here the IPv6 access list that will be matched will be displayed.
Here the MAC access list that will be matched will be displayed.
Figure 8-106 ACL VLAN Access Map (Binding, Selection) Window
459